• Home
  • Blog
  • FAQs
  • Contact
  • Home
  • Blog
  • FAQs
  • Contact

iPad Won’t Turn On? 8 Fixes, Even When It’s Plugged In

Table of Contents

An iPad that won’t turn on feels like a dead device. It often isn’t. A drained battery, a worn cable, or frozen software causes most cases, and you can test all three at home.

This guide covers eight fixes in the order we’d try them. If they don’t work, you’ll learn how to tell a battery problem from a screen or board problem. You’ll also see what repair looks like at our Hampton and Newport News stores.

Need it fixed today? Get a free diagnostic.

If your iPad won’t turn on, charge it for an hour with a wall adapter and a different cable. Then force restart it. If the screen stays black, connect it to a computer and try recovery mode. If nothing works, something inside may need repair. We can check it for free.

Is your iPad off, or is the screen just black?

An iPad with a black screen isn’t always off. The screen might be dark while the iPad runs fine. These quick checks take two minutes.

Listen for sounds and notifications

Ask someone to message you, or set off an alarm. If you hear a ping or feel a buzz, the iPad is on. The display is the problem. That points toward a damaged screen or a loose display connector, not a dead battery.

Plug it in and watch for a charging icon

Connect it to a wall adapter. Wait a few minutes. A charging icon or a low battery image means the iPad has power and needs more time. If nothing appears after an hour, keep reading.

Connect it to a Mac or PC and see if it shows up

Plug it into a computer. Open Finder on a Mac, or the Apple Devices app on a PC. If the iPad appears there, the hardware is alive. In that case, software is the likelier cause.

Why won’t my iPad turn on? 6 common causes

Knowing the cause saves time. Here are the usual suspects.

A fully drained battery

An iPad left unused for days can drain to zero. A very low battery sometimes needs a while on the charger before anything shows.

A bad cable, adapter or dirty charging port

A frayed cable or weak adapter may not deliver enough power. Lint in the port can also block the connection. This cause is common and cheap to fix.

Frozen software or a failed iPadOS update

A crash during startup or an interrupted update can leave the iPad stuck. It may look dead when it’s really frozen.

A damaged screen or display connector after a drop

A hard fall can loosen the display cable. The iPad may run while the screen stays black. You might even hear it chime.

An old battery that no longer holds a charge

Batteries wear out over time. An aging one can drop to zero fast, then refuse to wake up. If your iPad has been shutting down at 30 percent, this is a likely cause. 

Our iPad battery repair post explains the replacement.

Liquid or logic board damage

Water can corrode the logic board, which is the main circuit board. It may not fail right away. Damage sometimes shows up days later.

iPad won’t turn on: 8 fixes

Try these in order. Each step is a little harder than the last.

  1. Charge it with a different cable and a wall adapter, not a computer port. Computer ports often give too little power. Use an Apple adapter if you have one. Leave the iPad plugged in for up to an hour, as Apple suggests.
  2. Check the charging port for lint. Shine a flashlight into the port. If you see dust or lint, pull it out gently with a wooden toothpick. Skip metal tools. They can short the pins or bend them. If the port looks bent or loose, you’ll likely need a charging port repair see our iPad charging port repair.
  3. Force restart it. This clears most software freezes and won’t erase your data. Hold each button exactly as described below, and keep holding until the Apple logo appears. This can take a while. These steps come from Apple’s force restart page.
    1. iPad without a Home button: Press and quickly release the volume button closest to the top button. Do the same with the other volume button. Then hold the top button until you see the Apple logo.
    2. iPad with a Home button: Hold the Home button and the top button together until the Apple logo shows.
  4. Leave a long dead iPad on the charger, then try again. If it sat dead for weeks, give it a full hour on the charger. Then repeat the force restart while it’s still plugged in. Some units need longer, so be patient before you give up.
  5. Ask Siri to turn off VoiceOver or turn up the brightness. Say “Hey Siri” if that’s enabled. Then say “Turn off VoiceOver” or “Turn up the brightness.” VoiceOver has a screen curtain feature that can black out the display on purpose. A three finger triple tap toggles it on some setups.
  6. Connect it to a Mac or PC and update iPadOS. Plug it in and open Finder, or the Apple Devices app on a PC. If the iPad shows up, choose Update. Update keeps your data, so try it before anything stronger.
  7. Restore it in recovery mode. Back up first if you can. Use the same button steps from Apple’s page, but keep holding after the logo until you see the recovery screen. Choose Update first. If that fails, choose Restore. A restore erases the iPad, according to Apple’s restore guide. If the download takes more than 15 minutes, the iPad exits recovery mode. Start again.
  8. Do a DFU restore as the last software fix. DFU mode reaches deeper than recovery mode. Apple says it works directly with the hardware and doesn’t need a working system on the iPad. The button timing is tricky and differs by model. If you’re not comfortable, bring it to us instead.

iPad won’t turn on even when plugged in, or won’t charge or turn on

This one worries people the most. The iPad is plugged in, yet the screen stays black. Several things could be going on.

First, try a second cable and a second outlet. Cables fail more often than you’d expect. Next, check the port again for lint. Then let it charge for a full hour before judging.

If it still won’t charge or turn on, the battery or port may have failed. A swollen or very old battery sometimes stops accepting power. A damaged port can also cut the connection. A technician can test both in minutes. Our iPad charging port repair guide shows what that fix involves.

Old iPad won’t turn on after months in a drawer

Old iPads are tricky. A lithium ion battery that sits empty for months can sink too low to recover. Sometimes it wakes up after a long charge. Other times it won’t.

Plug it in and wait at least an hour. Try a force restart while it charges. If you see nothing after that, the battery probably needs replacing. A new battery often brings an old iPad back, and it can cost far less than a new tablet.

Battery, screen or board? Signs of each, and your repair options

Software fixes won’t help if the problem is hardware. These clues can point you in the right direction.

Battery. The iPad shut off at random, drained fast, or died at a mid level charge before it stopped working. It may also feel warm or look puffy. A battery replacement usually solves it.

Screen. You hear sounds or feel buzzes, but the display stays black. The glass may be cracked. This often follows a drop. See our iPad screen repair post for details.

Logic board. The iPad got wet, took a hard hit, or showed no sign of life at all. Board repairs are harder, and results vary. A technician needs to open it up before giving you a firm answer.

When it’s a hardware problem: If force restart, charging, and recovery mode all fail, stop trying new fixes. Repeated attempts won’t help a damaged part. A free diagnostic tells you what’s wrong before you spend anything.

iPad repair in Hampton and Newport News: free quote, 1 year warranty

Hampton: 1114 Big Bethel Rd #112, Hampton, VA 23666. Open Mon to Sat 10 am to 7 pm, Sun 12 to 6 pm.

Newport News: 12300 Jefferson Ave Ste 305, Newport News, VA 23602. Open Mon to Sat 10 am to 8 pm, Sun 11 am to 6 pm.

Walk in for a free quote. We’ll test the battery, port, and screen, then tell you what’s wrong. Most repairs finish the same day, and each one has a 1 year warranty. We’ve repaired devices since 2015.

Our iPad repair in Hampton and Newport News covers batteries, screens, and charging ports for iPad, iPad Air, iPad mini, and iPad Pro. You can also check our Hampton and Newport News pages for directions.

FAQ

How do I force restart an iPad?

It depends on the model. On an iPad without a Home button, press volume up, then volume down, then hold the top button until the Apple logo appears. With a Home button, hold it and the top button together. See the steps in fix 3.

How long does a completely dead iPad take to turn on?

Often about an hour on a good adapter, according to Apple. A badly drained or old battery may take longer. If nothing happens after that, the battery or port may be the problem.

How do I fix the black screen of death on my iPad?

Start with a force restart. Then try charging for an hour, followed by an update or restore in recovery mode. If the screen stays black through all of that, you may have a hardware fault.

Why is my iPad screen black but I can hear it?

The iPad is probably running. The display or its connector is the likely culprit, often after a drop. VoiceOver’s screen curtain can also cause this, so check that first.

Will I lose my data if I restore my iPad?

Yes. A restore erases everything, per Apple. Update keeps your data, so try that first. Back up whenever you can.

Is it worth fixing an old iPad that won’t turn on?

Often, yes, especially if the fix is a battery or port. If the repair costs more than the iPad is worth, replacing it may make more sense. Our repair or replace guide can help you decide.

Visit Cell Phone Zone

Call Us Now | Get a free quote

Visit either store for iPad repair in Hampton and Newport News.

  • Hampton: 1114 Big Bethel Rd #112, Hampton, VA 23666.
    Opening hours: Mon to Sat 10 am to 7 pm, Sun 12 to 6 pm.
  • Newport News: 12300 Jefferson Ave Ste 305, Newport News, VA 23602.
    Opening hours: Mon to Sat 10 am to 8 pm, Sun 11 am to 6 pm.
  • Phone: (757) 249-8786
Share it :

Latest post

Quick Fixes, Local Experts

Your neighborhood tech solution. Fast repairs, reliable service. Get back to life, faster.

Table of Contents